24" Trough is used to carry cables horizontally throughout the system. Uses QuikLock Coupler to attach trough and/or fittings.
The 24-inch WaveTrax Horizontal Trough comes in standard six-foot lengths. The trough can easily be cut to fit your network's specific application.
As a general rule of thumb, support the fiber trough every three to five feet with a bracket either at a coupler or anywhere along the trough with the trough support clamp.
The snap-together WaveTrax raceway system from Amphenol Telect reduces time spent on installations and retrofits.
See install sheet for detail.
New and existing fiber ducting layouts
Drops :: Attach WaveTrax Express Off-Ramps to drop fiber into equipment and racks. No cutting.
Intersecting runs :: Install Express T Interchanges to route fiber to intersecting runs. No cutting.
Parallel runs :: Build parallel runs by mounting two troughs,side-by-side, and installing the Express Overpass to route fiber from one trough to the other. No cutting.
Additional rows :: Install a WaveTrax Express T Interchange to add a row of equipment and distribute fiber from existing trough. No cutting.
24" trough solution :: Develop a 24" (plus) wide trough solution by mounting another 4" x 12" trough parallel to your existing trough,and connect the two troughs with an Express Overpass. No cutting.
Intersecting run ::Add an intersecting run onto legacy TE Fiberguide™- without cutting the trough - by utilizing Telect's WaveTrax Express Fiberguide Compatible Bracket. No cutting.
GET IN TOUCH
22425 East Appleway Ave #11
Liberty Lake, WA 99019
Need pricing or product availability?
Call 509.926.6000 or email email@example.com
ABOUT AMPHENOL TELECT