In a typical closet application, multiple signals must be managed. Yet there's seldom enough space to dedicate a full panel to each signal, nor does the circuit capacity justify a full panel. Telect multi-signal connectivity platforms and other modular solutions provide the capacity the application requires, with the flexibility to meet various challenges.

		Multifunctional Connectivity Panel – Modules Engineered specifically for low circuit count applications, Telect's multfunctional connectivity system enables the termination of DS1, DS3, Ethernet or fiber optic signals, either in an single-module wall-mount bracket or a three-module chassis that's also surface-mountable.		Part Number: Various part numbers Click here for details
		One-Module Wall-Mount Chassis for Multifunctional Panel Deploy a single connectivity module in this simple, compact chassis for Telect's multifunctional system. Deploy up to 12 DSX-1, 2 DSX-3 or 16 Ethernet terminations – ample capacity for most closet applications in a compact footprint engineered for backboards.		Part Number: ELF-0000-0600
		Fiber Optic Module Wall-Mount Bracket Additional cable management and fiber termination protection make this bracket an ideal solution for backboard-mounting of fiber optic patch and/or splice modules. Terminate up to 16 fibers – incoming feeder cables, patch cords, etc. – in a footprint that minimally impacts available space.		Part Number: ELF-0000-0800
		Wall-Mount Bracket for Three-Module Chassis Fasten a fully loaded multifunctional panel to the backboard with this simple bracket. Combine multiple signal types or deploy a high-density single-function solution – with this bracket, the panel protrudes just two inches from the backboard.		Part Number: ELF-0000-0900
		Wall-Mount DSX-1 Panels Terminate DS1 signals in a low circuit count panel dedicated exclusively to DS1s. Telect wall-mount DSX-1 panels occupy minimal space on the backboard. Eight- and 12-termination panels are available, in traditional -48V or -24V configurations.		Part Numbers: 010-5008-0001 010-5012-0001 010-5012-0003
		Total Front Access High-Density DSX-1 Panels For applications with a larger quantity of DS1 circuits, choose Telect's wall-mount 4000 Series DSX-1 panels. Configurations include 64- and 84-termination panels, both of which provide total front access to circuits.		Part Numbers: 010-4264-0001RE 010-4284-0001RE
		Total Front Access Wall-Mount DSX-3 Bracket Mount Telect's front access DSX-3 system directly to the backboard, minimizing the panel's impact on available physical space.		Part Number: 126363-1
		Total Front Access DSX-3 System Deploy the DSX-3 capacity you need without sacrificing space. This total front access system can be mounted to a backboard with the use of the above bracket. Six-port DSX-3 modules provide bi-directional monitoring of signals from a single location.		Part Numbers: 010-0000-0750 010-9201-0411